Gloves8 Logo
Providing safety gloves to laborers from over the world

HOW TO CLEAN AND STORE RUBBER GLOVES

July 12, 2022413 ViewsGloves8

Sanitizing our hands is basic in preventing the spread of viruses, but what about gloves? Gloves are still an effective method of protection from certain organisms and toxins. Caring for your gloves is an essential part of their value.

If they are not properly taken care of, your pair of gloves will become ineffective in the face of some rigorous use. They must be washed and cleaned to maintain their integrity. Failure to care for your gloves will also lead to them becoming unusable and rendered useless.

The Centers for Disease Control and Prevention (CDC) recommend proper disposal of all protective equipment (PPE) used in healthcare settings. Gloves are among the types of PPE that should be disinfected or if reusable, cleaned and disinfected after each use to prevent any cross-contamination from occurring.

How can you best care for your gloves? The following article provides some guidelines for handling and storing clean rubber gloves.

How to wash or clean reusable gloves

Gloves are worn for protection, so cleaning them can extend their lifespan and protect against contamination. Here is a step-by-step process to help you clean your gloves whether they are vinyl, nitrile, or latex gloves:

  1. Washing the outside of the gloves with soap or a mild detergent and hot water while they are still on your hands can help keep them sanitary. Rub the gloves together or with a cloth to remove dirt, germs, and other organic materials. Thoroughly rinse the gloves under running water.
  2. Take off the gloves and wash your hands with soap and water.
  3. Soak the gloves inside out in a mixture of soap and water for a few minutes.
  4. Hang the gloves to dry in a well-ventilated location. Make sure they are completely dry before folding them and putting them away.
  5. Keep the clean rubber gloves in a dry place to prevent mildew growth.

When Not To Wash

How to disinfect rubber gloves

Disinfectants are agents that destroy microorganisms on inanimate objects. They work by destroying the nucleic acids and proteins that make up all microorganisms, but should only be used on objects, never on the skin.

  1. After washing your gloves, be it latex gloves or what, make sure to dry them completely before proceeding to sanitation or disinfection.
  2. Clean the outside of rubber gloves with a sanitizing or disinfecting product to kill any germs left behind by your hands. Before using such products, read the label carefully to ensure that it is safe for use on the material of your gloves and follow all directions.
  3. Be sure to wash your hands thoroughly after.

Important Reminder on Disinfecting Gloves:

The Environmental Protection Agency has a list of registered disinfectants, but you should know that “EPA-registered surface disinfectants, including surface wipes, SHOULD NOT be applied on your skin or ingested.” For safety reasons, do not wipe down the inside of the gloves with the disinfectant as it may cause skin irritations.

How to sanitize rubber gloves

Sanitizers are agents used to rapidly reduce the number of disease-causing bacteria on inanimate objects in a short period of time. The process of sanitizing is basically the same as cleaning, and can be used to clean dishes, hard surfaces, and skin.

To sanitize your gloves, you can use the same process laid out above on washing your glove with mild detergent or sterilize them with an ethanol solution using the process below.

Sanitizers vs Disinfectants

Sanitizers are used at concentrations that kill microorganisms but don’t leave behind residue that can harm food or cause skin irritation; disinfectants are used at much higher concentrations to kill microorganisms, but may also leave harmful residues on food and skin.

How to sterilize latex gloves

Sterile latex gloves are often used in healthcare services to prevent the dangerous transmission of microorganisms upon contact. However, gloves can be sterilized at home for tasks in which the risk of infection is not great.

  1. Prepare your 70% ethanol solution or make one if you don’t have one. If you have already purchased a 70 percent ethanol solution for this task, skip this step.

If you do not have an ethanol solution available, prepare it by mixing 100% ethanol with distilled water in a ratio of 7:3. Pour the 70% solution into a clean spray bottle using a funnel to avoid spilling.

  1. Before you begin to sterilize latex gloves, wash your hands thoroughly with soap and water. Make sure you wash your fingers and wrist well, and avoid touching any surface other than the gloves.
  2. Spray the outside of the glove thoroughly, then use your fingers to turn it inside out. Repeat this procedure until all areas of both gloves have been covered with ethanol.
  3. After you sanitize the latex gloves, you can put them on to begin your task. But be careful not to touch any surface or ground before doing the task.

How to store reusable gloves